Johnson Oceanpro 250HP outboard
Original price was: $1,500.00.$1,200.00Current price is: $1,200.00.
Johnson Oceanpro 250HP outboard
|
|||||||||||||||||
| 2000 Johnson OceanPro Outboard Motor 250HP, Model J250VX22.Motor has been setting for approximately a year. | |||||||||||||||||
7 reviews for Johnson Oceanpro 250HP outboard
Related products
-
87 yamaha 150hp 2 stroke 20″ shaft
Original price was: $1,500.00.$1,000.00Current price is: $1,000.00.Add to cartOutboard Outboard Engine Type 150 HP 2-STROKE Lubrication Precision Blend Oil Injection Fuelinduction Carb Loop Charged Starter Electric Ignition CDI/Computer Alternator 25A Shaftlength 25/635(in/mm) Gear Ratio 1.86:1 Rated Speed 4500 r/min Displacement 2596 cm3 (2.60L, 158.42in3) Cylinders Arrangement/Number V6 (90 degrees) Weight 194 kg (427.70lbs) Power 150 HP (111.84kw)
-
2003 90hp 2-stroke Mercury Outboard
Original price was: $2,700.00.$2,200.00Current price is: $2,200.00.Add to cartThe prop is in excellent condition as well with only a couple very small chips. This motor runs very well, starts right up, idles nice low and smooth, throttles up with no hesitation, has great power and pumps cooling water well. The compression checked out perfect at 120+ psi on all three cylinders. The motor …
-
2013 50hp Honda Outboards
Original price was: $2,500.00.$1,800.00Current price is: $1,800.00.Add to cartEngines ship via truck freight on a full size semi truck. We ship engines all over the world and we are happy to provide quotes. We charge the actual freight costs to your location. The most economical shipping option is to ship engines to a commercial location with a dock or forklift to unload. Alternatively, …
-
2004 9.9hp 2-stroke Mercury Outboards
Original price was: $2,000.00.$1,200.00Current price is: $1,200.00.Add to cartSpecifications: Engine Type: 4-Stroke Propshaft HP: 9.9 hp 2-Cylinder Shaft Length: 15″ (Short Shaft) Tiller Steering Rope / Electric Start Weight: 91 Lbs RPM Range: 5000-6000 Displacement: 12.8 cu. in. (208 cc) Gear Ratio: 2.08:1 Standard Propeller: 3-Blade aluminum 8-7/8″ x 8-1/2″ Standard Features Include: Forward, Neutral and Reverse shift Single Carburetor Water Cooled 3.2 …
-
2008 90hp Yamaha outboard. 2-stroke
Original price was: $2,500.00.$2,000.00Current price is: $2,000.00.Add to cart2008 90hp Yamaha outboard for sale. 2-stroke 324 hours Oil injection Motor have been fully boat tested and runs excellent. Asking $2000.00 for motor only. Engine Type2-Stroke, In-line 3 Bore x Stroke (mm)82 x 72 Fuel Tank Capacity (l) Displacement (cc)1140.0 Recommended Maximum RPM4500-5500 Fuel ManagementCarb IgnitionCDI Lubrication SystemOil injection Alternator Output12V – 10A with …
Jeremy S. Gonzales –
I was very skeptical about buying a used outboard motor on the internet without actually being able to see it in person, hear it run, etc. After talking to you on the phone about the motor, I felt much better about buying from you. When the motor arrived, I instantly uncrated it. It looked better in person than it did on your webpage. I am very pleased with the motor and very glad that I found your website when I was looking for another motor. I would definitely recommend your company to others.
Jessica J. Barrett –
Thanks so much for the Johnson Oceanpro 250HP. It’s every bit the motor you said it
was and what a great deal at a good price! You packaged it well and the
shipment arrived safely and on-time. I boat tested it last weekend and WOW
– it’s a real screamer! It started on the first pull without choke, idled
smoothly, and responded quickly to throttle. I’d swear it planed my 16′
aluminum jonboat (with 3 onboard) in less than 100 feet!! I know that
we’re not talking mega-HPs here but I wanted something economical that
would safely push this little boat along at about 15-20mph. The boys will
definitely be happy for a long time with this one. Thanks again!
Lance K. Daniels –
I put the Gheenoe Classic on the river today with the 25 hp. It performed very well. Started easily, shifted perfectly, no problem any time. Power trim used to set balance. Speed maxed out at an almost even 30 mph GPS reading. I was pleased to see that the rpm maxed at 5950 with the stainless prop that had been tuned to around 5800 on previous 35 hp motors. I thought the redline was 6000 rpm on this motor (it was on a 1982 25 hp Johnson and also on my three previous 35’s). I didn’t check my spare prop , but I will although both props are identical and had been tuned on the same previous runs.
Elise T. Johnson –
After getting back this evening I looked at the specs in the service manual. Whoops! The redline on the 1990’s motors is 5500. So the props are going into Mike’s shop (Hall’s Propellor) to add an inch of pitch and then go on another test run. I want that redline rpm controlled by the prop.
Noah P. Gardner –
Thanks for your help with it. Your company is a great one to work with, and the motor is exactly as you described it. My friends are starting to get into the whole boating scene, so I will definitely pass on your company info to them. Thanks again!
Mark S Stockton –
Received it on Tuesday at lunchtime in perfect condition.Can’t believe I got it that quickly.The bill of sale that was mailed first-class on the same day didn’t get here until Wednesday.Can’t wait for the ice to get off the lakes to begin the break-in for trout season.
I’ll be looking for a larger motor shortly and will continue to check your website.
Andria M. Bryant –
I will be talking with you again next Feb as I will be looking to upgrade to a 15-25HP at that time. Its been a pleasure doing business with you.